Ил-2 Штурмовик: Битва за Британию. Скрипты. Список доступных повреждений самолетов — различия между версиями

Версия 19:32, 30 сентября 2011

ParameterTypes {
       #region Nil
       /// <summary>
       /// Nil parameter. Always shows -999.999d.
       /// </summary>
       Nil,
       #endregion

       #region Miscellaneous
       /// <summary>
       /// [Random Value]
       /// <para>Generic subtype (-1) indicates a random number in [0.0, 1.0];</para>
       /// <para>All other subtypes indicate a random number in [-1.0, 1.0].</para>
       /// <para>Also serves as an indicator to an undefined activity.</para>
       /// </summary>
       M_Random,
       /// <summary>
       /// [Shake Level]
       /// <para>Indicates current machine/camera shake gain.</para>
       /// <para>Applies only when Head Shake difficulty option is set to on.</para>
       /// </summary>
       M_Shake,
       /// <summary>
       /// [Cabin Damage Flags]
       /// <para>Indicates 1.0 when the cabin damage flag with a number of subtype is set, otherwise 0.0.</para>
       /// <para>Subtype can only be in range from 0 to 14 as it mirrors to CockpitDamageFlag## of NamedDamageTypes.</para>
       /// </summary>
       M_CabinDamage,
       /// <summary>
       /// [Cabin and Camera State]
       /// <para>Subtype 31 - Indicates 1.0 when the camera is in aiming sight periscope mode;</para>
       /// <para>Subtype 32 - Indicates 1.0 when the view point is raised seat mode.</para>
       /// </summary>
       M_CabinState,
       /// <summary>
       /// [Named Damage Flags]
       /// <para>Indicates 1.0 when the corresponding damage flag is set, otherwise 0.0.</para>
       /// <para>Refer to NamedDamageTypes for damage flags reference.</para>
       /// </summary>
       M_NamedDamage,
       /// <summary>
       /// [Systematic Wear]
       /// <para>Indicates corresponding system wear state; [0.0, 1.0]; 1.0 means completely worn and written off system.</para>
       /// <para>Subtype 0 shows airframe wear;</para>
       /// <para>Subtype 1 shows controls and control lines wear;</para>
       /// <para>Subtype 2 shows undercarriage wear;</para>
       /// <para>Subtype 3 shows landing flaps wear;</para>
       /// <para>Subtype 4 shows pneumatic system wear;</para>
       /// <para>Subtype 5 shows hydraulic system wear;</para>
       /// <para>Subtype 6 shows electrical system wear;</para>
       /// <para>Subtype 7 shows auxilaries;</para>
       /// <para>Subtypes 8 to 15 show corresponding engine (#0 - #7) wear level;</para>
       /// </summary>
       M_SystemWear,
       /// <summary>
       /// [Health]
       /// <para>Indicates appx. health level of the machine; [0.0, 1.0].</para>
       /// </summary>
       M_Health,
       #endregion

       #region Controls
       #region Controls - Machine Generic
       /// <summary>
       /// [Steering Control]
       /// <para>Indicates current steering control (input) of the machine; [-1.0, 1.0].</para>
       /// </summary>
       C_Steering,
       /// <summary>
       /// [Wheel Brake Control]
       /// <para>Indicates wheel brakes control; [0.0, 1.0].</para>
       /// <para>Generic subtype (-1) shows overall brake control input;</para>
       /// <para>Subtype 0 shows left side brakes;</para>
       /// <para>Subtype 1 shows right side brakes.</para>
       /// </summary>
       C_Brake,
       /// <summary>
       /// [Throttle Control]
       /// <para>Indicates engine throttle control; [0.0, 1.0], on some types [0.0, 1.1].</para>
       /// <para>Generic subtype (-1) shows control for the current motor selection;</para>
       /// <para>Other subtypes show control in the corresponding individual motor.</para>
       /// </summary>
       C_Throttle,
       /// <summary>
       /// [Trigger Control]
       /// <para>Indicates 1.0 when the corresponding trigger is pressed.</para>
       /// <para>Trigger # is equal to subtype.</para>
       /// <para>The trigger # is counted within the machine, not the controlling puppet.</para>
       /// </summary>
       C_Trigger,
       #endregion

       #region Controls - Machine Engine(s)
       /// <summary>
       /// [Propellor / Pitch Control]
       /// <para>Indicates engine prop. control; [0.0, 1.0].</para>
       /// <para>Generic subtype (-1) shows control for the current motor selection;</para>
       /// <para>Other subtypes show control in the corresponding individual motor.</para>
       /// </summary>
       C_Pitch,
       /// <summary>
       /// [Mix Control]
       /// <para>Indicates engine mix control; [0.0, 1.0].</para>
       /// <para>Generic subtype (-1) shows control for the current motor selection;</para>
       /// <para>Other subtypes show control in the corresponding individual motor.</para>
       /// </summary>
       C_Mix,
       /// <summary>
       /// [Water / Air Radiator Control]
       /// <para>Indicates engine radiator control; [0.0, 1.0].</para>
       /// <para>For inline engines shows water radiator control;</para>
       /// <para>for radial engines shows cowl flaps control.</para>
       /// <para>Generic subtype (-1) shows control for the current motor selection;</para>
       /// <para>Other subtypes show control in the corresponding individual motor.</para>
       /// </summary>
       C_WaterRadiator,
       /// <summary>
       /// [Oil Radiator Control]
       /// <para>Indicates engine oil radiator control; [0.0, 1.0].</para>
       /// <para>Generic subtype (-1) shows control for the current motor selection;</para>
       /// <para>Other subtypes show control in the corresponding individual motor.</para>
       /// </summary>
       C_OilRadiator,
       /// <summary>
       /// [Radiator Automation Control]
       /// <para>Indicates 1.0 when radiator control is automatic.</para>
       /// <para>Generic subtype (-1) shows control for the current motor selection;</para>
       /// <para>Other subtypes show control in the corresponding individual motor.</para>
       /// </summary>
       C_RadiatorAutomation,
       /// <summary>
       /// [Propellor / Pitch Automation Control]
       /// <para>Indicates 1.0 when prop. control is automatic.</para>
       /// <para>Generic subtype (-1) shows control for the current motor selection;</para>
       /// <para>Other subtypes show control in the corresponding individual motor.</para>
       /// </summary>
       C_PitchAutomation,
       /// <summary>
       /// [Engine Compressor Control]
       /// <para>Indicates selected compressor stage.</para>
       /// <para>Generic subtype (-1) shows control for the current motor selection;</para>
       /// <para>Other subtypes show control in the corresponding individual motor.</para>
       /// </summary>
       C_Compressor,
       /// <summary>
       /// [Afterburner / W.E.P. Control]
       /// <para>Indicates 1.0 when afterburner / W.E.P. is engaged.</para>
       /// <para>Generic subtype (-1) shows control for the current motor selection;</para>
       /// <para>Other subtypes show control in the corresponding individual motor.</para>
       /// </summary>
       C_Afterburner,
       /// <summary>
       /// [Boost Cut-Out Control]
       /// <para>Indicates 1.0 when engine boost cut-out control is engaged.</para>
       /// <para>Generic subtype (-1) shows control for the current motor selection;</para>
       /// <para>Other subtypes show control in the corresponding individual motor.</para>
       /// </summary>
       C_BoostEnabler,
       /// <summary>
       /// [Slow-Running Cut-Out]
       /// <para>Indicates 1.0 when engine slow-running cut-out control is engaged.</para>
       /// <para>Generic subtype (-1) shows control for the current motor selection;</para>
       /// <para>Other subtypes show control in the corresponding individual motor.</para>
       /// </summary>
       C_SlowRunningCutOut,
       /// <summary>
       /// [Magnetos Control]
       /// <para>Indicates magnetos switch(es).</para>
       /// <para>Generic subtype (-1) shows control for the current motor selection;</para>
       /// <para>Other subtypes show control in the corresponding individual motor.</para>
       /// </summary>
       C_Magneto,
       /// <summary>
       /// [Feather Control]
       /// <para>Indicates propellor feather control.</para>
       /// <para>Generic subtype (-1) shows control for the current motor selection;</para>
       /// <para>Other subtypes show control in the corresponding individual motor.</para>
       /// </summary>
       C_Feather,
       /// <summary>
       /// [Carburetter / Intake Heater Control]
       /// <para>Indicates engine carb. heater control; [0.0, 1.0].</para>
       /// <para>Generic subtype (-1) shows control for the current motor selection;</para>
       /// <para>Other subtypes show control in the corresponding individual motor.</para>
       /// </summary>
       C_CarbHeater,
       #endregion

       #region Controls - Machine Systems
       /// <summary>
       /// [Hatch / Cabin Door Control]
       /// <para>Indicates hatch control of the given puppet.</para>
       /// <para>Subtype equals puppet index.</para>
       /// </summary>
       C_HatchDoor,
       /// <summary>
       /// [Canopy / Cabin Door Jettison Control]
       /// <para>Indicates jettison control of the given puppet.</para>
       /// <para>Subtype equals puppet index.</para>
       /// </summary>
       C_HatchJettison,
       /// <summary>
       /// [Stopwatch Control]
       /// <para>Indicates selected stopwatch mode.</para>
       /// </summary>
       C_Timer,
       #endregion

       #region Controls - Aircraft Direction
       /// <summary>
       /// [Ailerones Control]
       /// <para>Indicates ailerones contol input; [-1.0, 1.0].</para>
       /// <para>Positive control is roll right.</para>
       /// </summary>
       C_Aileron,
       /// <summary>
       /// [Elevator Control]
       /// <para>Indicates elevator control input; [-1.0, 1.0].</para>
       /// <para>Positive control is nose up.</para>
       /// </summary>
       C_Elevator,
       /// <summary>
       /// [Rudder Control]
       /// <para>Indicates rudder control input; [-1.0, 1.0].</para>
       /// <para>Positive control is turn right.</para>
       /// </summary>
       C_Rudder,
       /// <summary>
       /// [Ailerones Trim Control]
       /// <para>Indicates ailerones trim contol input.</para>
       /// <para>Positive control is roll right.</para>
       /// </summary>
       C_AileronTrim,
       /// <summary>
       /// [Elevator Trim Control]
       /// <para>Indicates elevator trim control input.</para>
       /// <para>Positive control is nose up.</para>
       /// </summary>
       C_ElevatorTrim,
       /// <summary>
       /// [Rudder Trim Control]
       /// <para>Indicates rudder trim control input.</para>
       /// <para>Positive control is turn right.</para>
       /// </summary>
       C_RudderTrim,
       /// <summary>
       /// [Tail Wheel Steer Lock Control]
       /// <para>Indicates 1.0 when tail lock control is engaged.</para>
       /// </summary>
       C_TailwheelLock,
       #endregion

       #region Controls - Aircraft Systems
       /// <summary>
       /// [Landing Flaps Control]
       /// <para>Indicates selected landing flaps position index ([0, N]);</para>
       /// <para>or direction ({0 neutral, 11 in, 12 out}).</para>
       /// </summary>
       C_LandingFlap,
       /// <summary>
       /// [Leading Edge Slats Control]
       /// <para>Indicates leading edge slats control; [0.0, 1.0].</para>
       /// </summary>
       C_LeadingEdgeSlats,
       /// <summary>
       /// [Undercarriage Extension Control]
       /// <para>Indicates selected undercarriage position index ([0, N]);</para>
       /// <para>or direction ({0 neutral, 11 in, 12 out}).</para>
       /// </summary>
       C_Undercarriage,
       /// <summary>
       /// [Undercarriage Emergency System Control]
       /// <para>Indicates selected undercarriage emergency control position index.</para>
       /// </summary>
       C_UndercarriageEmergency,
       /// <summary>
       /// [Bomb Bay Doors Control]
       /// <para>Indicates selected bomb bay doors opening position ([0.0, 1.0]);</para>
       /// <para>or direction ({0.0 neutral, 0.5 in, 1.0 out}).</para>
       /// </summary>
       C_BombBayDoor,
       /// <summary>
       /// [Airbrake Control]
       /// <para>Indicates selected airbrake position index ([0, N]);</para>
       /// <para>or direction ({0 neutral, 11 in, 12 out}).</para>
       /// </summary>
       C_Airbrake,
       /// <summary>
       /// [Fuel Tank Switch / Fuel Cock Control]
       /// <para>Indicates selected fuel cock position index.</para>
       /// <para>Subtype equals fuel cock index in machine.</para>
       /// </summary>
       C_FuelTankSelector,
       /// <summary>
       /// [Control for Telepirometro Elettrico / Cylinder Head Temp. Sender Selector]
       /// <para>Indicates telepirometro elettrico position.</para>
       /// </summary>
       C_TelepirometroElettrico,
       /// <summary>
       /// [Altimeter Pinion]
       /// <para>Indicates altimeter pressure setter knob position.</para>
       /// </summary>
       C_AltimeterPinion,
       /// <summary>
       /// [Anemometro / Speed Dial Rotation Control]
       /// <para>Indicates velocity indicator shift in degrees.</para>
       /// </summary>
       C_AnemometroPinion,
       /// <summary>
       /// [Bomb Sight Controls]
       /// <para>Indicates bomb sight input controls.</para>
       /// <para>Subtype 0 shows velocity, preset units;</para>
       /// <para>Subtype 1 shows altitude, preset units;</para>
       /// <para>Subtype 2 shows slip, preset units;</para>
       /// <para>Subtype 3 shows distance, preset units;</para>
       /// <para>Subtype 4 indicates 1.0 when automatic control is engaged.</para>
       /// </summary>
       C_BombSight,
       /// <summary>
       /// [Aiming Sight / Acemaker Controls]
       /// <para>Indicates gun sight input controls.</para>
       /// <para>Subtype 0 shows distance, preset units;</para>
       /// <para>Subtype 1 shows side / auxilary input, preset units;</para>
       /// <para>Subtype 2 shows dimmer plate control.</para>
       /// </summary>
       C_Sight,
       /// <summary>
       /// [Bombenabwurfgerat]
       /// <para>Indicates bomb distributor controls.</para>
       /// <para>Subtype 0 shows mode index in modes list;</para>
       /// <para>Subtype 1 indicates 1.0 when bomb arming is on;</para>
       /// <para>Subtype 2 shows selected slot (-1.0 points to all slots);</para>
       /// <para>Subtype 3 shows series length (-1.0 point to max length);</para>
       /// <para>Subtype 4 shows delay (between bombs in series);</para>
       /// <para>Subtype 5 indicates 1.0 when in dive short delay mode;</para>
       /// <para>Subtype 6 shows mode ({0 single, 1 series, 2 salvo}).</para>
       /// </summary>
       C_Bombenabwurfgerat,
       /// <summary>
       /// [Fuel Contents Indicator Control]
       /// <para>Indicates selected indicator switch position.</para>
       /// </summary>
       C_KraftstoffSelector,
       /// <summary>
       /// [Riquid Reserve Indicator 0 Control]
       /// <para>Indicates selected indicator switch position.</para>
       /// </summary>
       C_LiquidGauge0,
       /// <summary>
       /// [Riquid Reserve Indicator 1 Control]
       /// <para>Indicates selected indicator switch position.</para>
       /// </summary>
       C_LiquidGauge1,
       /// <summary>
       /// [Primary Light Switch]
       /// <para>Indicates lighting switch position.</para>
       /// <para>Subtype equals puppet index in machine.</para>
       /// </summary>
       C_PriLights,
       /// <summary>
       /// [Secondary Light Switch]
       /// <para>Indicates lighting switch position.</para>
       /// <para>Subtype equals puppet index in machine.</para>
       /// </summary>
       C_SecLights,
       /// <summary>
       /// [Gunsight Light Switch]
       /// <para>Indicates lighting switch position.</para>
       /// </summary>
       C_SightLights,
       /// <summary>
       /// [Pitot Heater Switch]
       /// <para>Indicates 1.0 when pitot heater is switched on.</para>
       /// </summary>
       C_PitotHeater,
       /// <summary>
       /// [Hydraulic Hand Pump Lever]
       /// <para>Indicates position of emergency hand pump; [0.0, 1.0].</para>
       /// </summary>
       C_Handpumpe,
       /// <summary>
       /// [Transciever Frequency]
       /// <para>Indicates selected transciever frequency.</para>
       /// </summary>
       C_RadTXRX,
       /// <summary>
       /// [Primary Navigation Frequency]
       /// <para>Indicates selected primary frequency on navigation equipment.</para>
       /// </summary>
       C_RadPriNav,
       /// <summary>
       /// [Secondary Navigation Frequency]
       /// <para>Indicates selected secondary frequency on navigation equipment.</para>
       /// </summary>
       C_RadSecNav,
       /// <summary>
       /// [Kurssteuerung / Course Autopilot Controls]
       /// <para>Indicates kurssteuerung input.</para>
       /// <para>Subtype 0 shows mode of operation;</para>
       /// <para>Subtype 1 shows preset course;</para>
       /// <para>Subtype 2 indicates 1.0 when temp. disengage switch is on.</para>
       /// </summary>
       C_Kurssteuerung,
       #endregion
       #endregion

       #region Parameters
       #region Parameters - Machine Animation - Directional
       /// <summary>
       /// [Steering Animation]
       /// <para>Indicates machine steering mechanism position; [-1.0, 1.0].</para>
       /// </summary>
       A_Steering,
       /// <summary>
       /// [Wheel Brake Animation]
       /// <para>Indicates wheel brakes position; [0.0, 1.0].</para>
       /// <para>Generic subtype (-1) shows overall brakes gain;</para>
       /// <para>Subtype 0 shows left brakes;</para>
       /// <para>Subtype 1 shows right brakes.</para>
       /// </summary>
       A_Brake,
       /// <summary>
       /// [Ailerones Animation]
       /// <para>Indicates ailerones position; [-1.0, 1.0].</para>
       /// </summary>
       A_Aileron,
       /// <summary>
       /// [Elevator Animation]
       /// <para>Indicates elevator position; [-1.0, 1.0].</para>
       /// </summary>
       A_Elevator,
       /// <summary>
       /// [Rudder Animation]
       /// <para>Indicates rudder position; [-1.0, 1.0].</para>
       /// </summary>
       A_Rudder,
       /// <summary>
       /// [Ailerones Trim Animation]
       /// <para>Indicates ailerones trim position / flap deflection.</para>
       /// </summary>
       A_AileronTrim,
       /// <summary>
       /// [Elevator Trim Animation]
       /// <para>Indicates elevator trim position / flap deflection.</para>
       /// </summary>
       A_ElevatorTrim,
       /// <summary>
       /// [Rudder Trim Animation]
       /// <para>Indicates rudder trim position / flap deflection.</para>
       /// </summary>
       A_RudderTrim,
       #endregion

       #region Parameters - Machine Animation - Systematic
       /// <summary>
       /// [Undercarriage Extension Animation]
       /// <para>Indicates undercarriage strut movement extension-wise; [0.0, 1.0].</para>
       /// <para>Subtype points to the number of strut in machine.</para>
       /// </summary>
       A_Undercarriage,
       /// <summary>
       /// [Undercarriage Shock Animation]
       /// <para>Indicates strut shock travel in meters.</para>
       /// <para>Subtype points to the number of strut in machine.</para>
       /// </summary>
       A_UndercarriageShock,
       /// <summary>
       /// [Wheel Rotatory Movement Animation]
       /// <para>Indicates angle of wheel.</para>
       /// </summary>
       A_UndercarriageWheel,
       /// <summary>
       /// [Canopy / Door Opening Animation]
       /// <para>Indicates animation phase of canopy or door during opening / closing; [0.0, 1.0].</para>
       /// <para>Subtype equals to hatch index in machine's list.</para>
       /// </summary>
       A_HatchDoor,
       /// <summary>
       /// [Bomb Bay Doors Opening Animation]
       /// <para>Indicates bomb bay(s) doors opening phase; [0.0 1.0].</para>
       /// </summary>
       A_BombBayDoor,
       /// <summary>
       /// [Wind Generator Impeller Rotatory Animation]
       /// <para>Indicates wind generator impeller angle in degrees.</para>
       /// </summary>
       A_ImpellerAngle,
       /// <summary>
       /// [Wind Generator Impeller's Angular Velocity]
       /// <para>Indicates wind generator angular velocity in degrees / second.</para>
       /// </summary>
       A_ImpellerAngularVelocity,
       /// <summary>
       /// [Wind Generator Strut Extension Animation]
       /// <para>Indicates impeller strut extension phase; [0.0, 1.0].</para>
       /// </summary>
       A_ImpellerUnfold,
       /// <summary>
       /// [Landing Flaps Extension Animation]
       /// <para>Indicates landing flaps' extension; [0.0 1.0].</para>
       /// <para>Generic subtype (-1) shows average position of all flaps;</para>
       /// <para>Subtype 0 shows extension of left flap;</para>
       /// <para>Subtype 1 shows extension of right flap.</para>
       /// </summary>
       A_LandingFlap,
       /// <summary>
       /// [Airbrake Extension Animation]
       /// <para>Indicates airbrake extension; [0.0, 1.0].</para>
       /// </summary>
       A_Airbrake,
       /// <summary>
       /// [Engine Cowling Flaps Animation]
       /// <para>Indicates cowling flaps extension; [0.0, 1.0].</para>
       /// <para>Subtype points to engine number.</para>
       /// </summary>
       A_EngineAirRadiator,
       /// <summary>
       /// [Engine Water Radiator Flap Animation]
       /// <para>Indicates water radiator opening; [0.0, 1.0].</para>
       /// <para>Subtype points to engine number.</para>
       /// </summary>
       A_EngineWaterRadiator,
       /// <summary>
       /// [Engine Oil Radiator Flap Animation]
       /// <para>Indicates oil radiator opening; [0.0, 1.0].</para>
       /// <para>Subtype points to engine number.</para>
       /// </summary>
       A_EngineOilRadiator,
       /// <summary>
       /// [Leading Edge Slat Extension Animation]
       /// <para>Indicates leading-edge slats' extension; [0.0, 1.0].</para>
       /// <para>Generic subtype (-1) shows average position of both slats;</para>
       /// <para>Subtype 0 shows extension on the left wing;</para>
       /// <para>Subtype 1 shows extension on the right wing.</para>
       /// </summary>
       A_LeadingEdgeSlat,
       #endregion

       #region Parameters - Machine Spatial
       /// <summary>
       /// [Misc.: Machine Spatial Coordinates]
       /// <para>Indicates machine position in world coordinates.</para>
       /// <para>Subtype 0 shows X-coordinate;</para>
       /// <para>Subtype 1 shows Y-coordinate;</para>
       /// <para>Subtype 2 shows Z-coordinate.</para>
       /// </summary>
       Z_Coordinates,
       /// <summary>
       /// [Misc.: Machine Spatial Orientation]
       /// <para>Indicates machine orientation, angles are in degrees.</para>
       /// <para>Subtype 0 shows yaw (0 degrees point E);</para>
       /// <para>Subtype 1 shows pitch (nose-up is negative);</para>
       /// <para>Subtype 2 shows roll (right roll is positive).</para>
       /// </summary>
       Z_Orientation,
       /// <summary>
       /// [Misc.: Machine Overload under Acceleration]
       /// <para>Indicates overload in m/s/s.</para>
       /// <para>Generic subtype (-1) shows accelerometer, being 0 under normal conditions;</para>
       /// <para>Subtype 0 shows acceleraton along machine's X axis;</para>
       /// <para>Subtype 1 shows acceleraton along machine's Y axis;</para>
       /// <para>Subtype 2 shows acceleraton along machine's Z axis.</para>
       /// </summary>
       Z_Overload,
       /// <summary>
       /// [Misc.: Machine Altitude AGL]
       /// <para>Indicates machine elevation above ground level in meters.</para>
       /// </summary>
       Z_AltitudeAGL,
       /// <summary>
       /// [Misc.: Machine Altitude MSL]
       /// <para>Indicates machine elevation above 0.0 Z-plane.</para>
       /// </summary>
       Z_AltitudeMSL,
       /// <summary>
       /// [Misc.: Machine's Velocity in Air]
       /// <para>Indicates machine's aerial velocity.</para>
       /// <para>Generic subtype (-1) shows velocity length;</para>
       /// <para>Subtype 0 shows aerial flow along machine's X-axis;</para>
       /// <para>Subtype 1 shows aerial flow along machine's Y-axis;</para>
       /// <para>Subtype 2 shows aerial flow along machine's Z-axis.</para>
       /// </summary>
       Z_VelocityIAS,
       /// <summary>
       /// [Misc.: Machine's Velocity in World Coordinates]
       /// <para>Indicates machine's absolute velocity.</para>
       /// <para>Generic subtype (-1) shows velocity length;</para>
       /// <para>Subtype 0 shows machine's speed along world's X-coordinate;</para>
       /// <para>Subtype 1 shows machine's speed along world's Y-coordinate;</para>
       /// <para>Subtype 2 shows machine's speed along world's Z-coordinate.</para>
       /// </summary>
       Z_VelocityTAS,
       /// <summary>
       /// [Misc.: Machine's Mach Factor]
       /// <para>Indicates machine's aerial velocity devided by sonic speed.</para>
       /// <para>Generic subtype (-1) shows velocity length;</para>
       /// <para>Subtype 0 shows aerial flow along machine's X-axis;</para>
       /// <para>Subtype 1 shows aerial flow along machine's Y-axis;</para>
       /// <para>Subtype 2 shows aerial flow along machine's Z-axis.</para>
       /// </summary>
       Z_VelocityMach,
       /// <summary>
       /// [Misc.: Ambient Temperature]
       /// <para>Indicates air temperature around machine's location, in K.</para>
       /// </summary>
       Z_AmbientAirTemperature,
       #endregion
       #region Parameters - Machine Systems
       /// <summary>
       /// [Electrical System Point Voltage]
       /// <para>Indicates current system voltage taken on gen.-battery bridge, in V.</para>
       /// </summary>
       S_ElectricVoltage,
       /// <summary>
       /// [Electrical System Incandescing Ratio]
       /// <para>Indicates incandescing bulbs gain factor under current system voltage; [0.0, 1.0].</para>
       /// <para>Used to vivify lightning SFX.</para>
       /// </summary>
       S_ElectricIncandescingRatio,
       /// <summary>
       /// [Electical System Amperage]
       /// <para>Indicates current flow.</para>
       /// <para>Subtype 0 shows flow in generator loom;</para>
       /// <para>Subtype 1 shows flow in battery loom;</para>
       /// <para>Subtype 2 shows flow in consumer loom.</para>
       /// </summary>
       S_ElectricAmperage,
       /// <summary>
       /// [Primary Pit Lightning]
       /// <para>Indicates primary pit lights gain factor for given puppet.</para>
       /// </summary>
       S_ElectricPrimaryPitLight,
       /// <summary>
       /// [Secondary Pit Lightning]
       /// <para>Indicates secondary pit lights gain factor for given puppet.</para>
       /// </summary>
       S_ElectricSecondaryPitLight,
       /// <summary>
       /// [Gunsight Lightning]
       /// <para>Indicates gunsight / reticle lightning gain factor.</para>
       /// </summary>
       S_ElectricSightLight,
       /// <summary>
       /// [Fuel Reserve]
       /// <para>Indicates machine's fuel reserve, kgs.</para>
       /// <para>Generic subtype (-1) shows total reserve;</para>
       /// <para>Subtype N shows reserve in the given fuel tank.</para>
       /// </summary>
       S_FuelReserve,
       /// <summary>
       /// [Hatch Position]
       /// <para>Indicates given hatch opening phase, [0.0, 1.0].</para>
       /// <para>Subtype points to hatch number in machine's list.</para>
       /// </summary>
       S_HatchDoor,
       #endregion
       #region Parameters - Aircraft Systems
       /// <summary>
       /// [Undercarriage Master Valve]
       /// <para>Indicates position of undercarriage hydraulic valve ({0 up, 1 down, 2 neutral, 3 neutral}).</para>
       /// </summary>
       S_UndercarriageValve,
       /// <summary>
       /// [Pneumatic Container Pressure]
       /// <para>Indicates current container pressure in machine's set units of measure.</para>
       /// <para>Subtype 0 shows pressure in primary container;</para>
       /// <para>Subtype 1 shows pressure in secondary container.</para>
       /// </summary>
       S_PneumoContainerPressure,
       /// <summary>
       /// [Pneumatic Line Pressure(s)]
       /// <para>Indicates pressure in given pneumatic line.</para>
       /// <para>Generic subtype (-1) shows nominal system pressure;</para>
       /// <para>Subtype 0 shows compressor line pressure;</para>
       /// <para>Subtype 1 shows secondary pressure;</para>
       /// <para>Subtype 2 shows flaps line pressure;</para>
       /// <para>Subtype 3 shows undercarriage line pressure;</para>
       /// <para>Subtype 4 shows wheel brakes line pressure.</para>
       /// </summary>
       S_PneumoLinePressure,
       /// <summary>
       /// [Hydro System Pressure(s)]
       /// <para>Indicates pressure in given hydro line.</para>
       /// <para>Generic subtype (-1) shows compressor line pressure;</para>
       /// <para>Subtype 0 shows nominal system pressure;</para>
       /// <para>Subtype 1 shows pressure in emergency discharge container.</para>
       /// </summary>
       S_HydroPressure,
       /// <summary>
       /// [Hydro System Reservoir]
       /// <para>Indicates reservoir contents, kgs.</para>
       /// </summary>
       S_HydroReserve,
       /// <summary>
       /// [Sturzanlage Mode of Operation]
       /// <para>Indicates mode ({0 cruise, 1 dive, 2 bomb drop, 3 recovery, 4 automation reset, 5 automation switch to cruise}).    </para>
       /// </summary>
       S_Sturzanlage,
       /// <summary>
       /// [Gun Mode of Operation]
       /// <para>Indicates mode of given gun ({0 dismantled, 1 ready, 2 firing, 3 reloading, 4 jammed}).</para>
       /// <para>Subtype points to gun attachment hook (looking up gun on hook named [_Gun+subtype]).</para>
       /// </summary>
       S_GunOperation,
       /// <summary>
       /// [Gun Ammo Reserve]
       /// <para>Indicates current number of bullets in gun storage.</para>
       /// <para>Subtype points to gun attachment hook (looking up gun on hook named [_Gun+subtype]).</para>
       /// </summary>
       S_GunReserve,
       /// <summary>
       /// [Gun Clip Reserve]
       /// <para>Indicates number of bullets in current gun loaded clip / ammo box.</para>
       /// <para>Subtype points to gun attachment hook (looking up gun on hook named [_Gun+subtype]).</para>
       /// </summary>
       S_GunClipReserve,
       /// <summary>
       /// [Bomb Spawn Ammo Reserve]
       /// <para>Indicates number of bombs in bombgun storage.</para>
       /// <para>Subtype points to attachment hook (looking up gun on hook named [_Bomb+subtype]).</para>
       /// </summary>
       S_BombReserve,
       /// <summary>
       /// [Fenster Opening]
       /// <para>Indicates fenster opening, [0.0, 1.0].</para>
       /// </summary>
       S_Fenster,
       /// <summary>
       /// [Pitot Heater]
       /// <para>Indicates pitot heater gain ratio.</para>
       /// </summary>
       S_PitotHeater,
       /// <summary>
       /// [Bombenabwurfgerat]
       /// <para>Indicates machine bomb distributor parameters.</para>
       /// <para>Generic subtype (-1) shows mode ({0 single, 1 series, 2 salvo});</para>
       /// <para>Subtype 0 shows mode ({0 single, 1 series, 2 salvo});</para>
       /// <para>Subtype 1 shows 1.0 if arming is on;</para>
       /// <para>Subtype 2 shows selected slot (-1 if all slots selected);</para>
       /// <para>Subtype 3 shows series length (-1 if all bombs selected);</para>
       /// <para>Subtype 4 shows 1.0 if short / dive delay is on;</para>
       /// <para>Subtype 9 shows 1.0 while abwurfgerat is in bomb drop operation.</para>
       /// </summary>
       S_Bombenabwurfgerat,
       /// <summary>
       /// [Turret]
       /// <para>Indicates machine turret parameters.</para>
       /// <para>Subtype digit 1 stands for puppet #; Subtype digit 2 stands turret index in given puppet;</para>
       /// <para>Subtype digit 3: 0 - Unfold, 1 - Lower Lock, 2 - Mount Yaw, 3 - Upper Lock,</para>
       /// <para>                 4 - Mount Pitch, 5 - Swivel Yaw, 6 - Swivel Pitch.</para>
       /// <para>Ex.: 105 - Swivel yaw on main turret of puppet #1.</para>
       /// </summary>
       S_Turret,
       #endregion
       #region RESERVED PLACEHOLDERS
       M_Reserved000,
       M_Reserved001,
       M_Reserved002,
       M_Reserved003,
       M_Reserved004,
       M_Reserved005,
       M_Reserved006,
       M_Reserved007,
       M_Reserved008,
       M_Reserved009,
       M_Reserved00A,
       M_Reserved00B,
       M_Reserved00C,
       M_Reserved00D,
       M_Reserved00E,
       M_Reserved00F,
       M_Reserved010,
       M_Reserved011,
       M_Reserved012,
       M_Reserved013,
       M_Reserved014,
       M_Reserved015,
       M_Reserved016,
       M_Reserved017,
       M_Reserved018,
       M_Reserved019,
       M_Reserved01A,
       M_Reserved01B,
       M_Reserved01C,
       M_Reserved01D,
       M_Reserved01E,
       M_Reserved01F,
       #endregion
       #region Parameters - Instrumentation
       #region Instrumentation - Assorted
       /// <summary>
       /// [Inst: Timer]
       /// <para>Returns timer reading.</para>
       /// <para>Generic subtype (-1) shows clock / time of day, hours, [0.0, 24.0);</para>
       /// <para>Subtype 0 shows stopwatch reading, seconds.</para>
       /// </summary>
       I_Timer, // NB: I_Timer works as a separator for all I_* types, must be on top of instrumentation section
       /// <summary>
       /// [Inst: Ambient Temperature]
       /// <para>Returns ambient temperature gauge reading.</para>
       /// </summary>
       I_AmbientTemp,
       #endregion
       #region Instrumentation - Engine
       /// <summary>
       /// [Inst: Engine RPM]
       /// <para>Returns engine RPM gauge reading.</para>
       /// <para>Subtype points to engine number in machine's list.</para>
       /// </summary>
       I_EngineRPM,
       /// <summary>
       /// [Inst: Engine Manifold Pressure]
       /// <para>Returns engine manifold press. gauge reading.</para>
       /// <para>Subtype points to engine number in machine's list.</para>
       /// </summary>
       I_EngineManPress,
       /// <summary>
       /// [Inst: Engine Boost Pressure]
       /// <para>Returns boost gauge reading.</para>
       /// <para>Subtype points to engine number in machine's list.</para>
       /// </summary>
       I_EngineBoostPress,
       /// <summary>
       /// [Inst: Engine Water Pressure]
       /// <para>Returns water press. gauge reading.</para>
       /// <para>Subtype points to engine number in machine's list.</para>
       /// </summary>
       I_EngineWatPress,
       /// <summary>
       /// [Inst: Engine Oil Pressure]
       /// <para>Returns oil pressure gauge reading.</para>
       /// <para>Subtype points to engine number in machine's list.</para>
       /// </summary>
       I_EngineOilPress,
       /// <summary>
       /// [Inst: Engine Fuel Pressure]
       /// <para>Returns fuel pressure gauge reading.</para>
       /// <para>Subtype points to engine number in machine's list.</para>
       /// </summary>
       I_EngineFuelPress,
       /// <summary>
       /// [Inst: Engine Water Temperature]
       /// <para>Returns water temp. gauge reading.</para>
       /// <para>Subtype points to engine number in machine's list.</para>
       /// </summary>
       I_EngineWatTemp,
       /// <summary>
       /// [Inst: Engine Water Radiator Temperature]
       /// <para>Returns water temp. (rad. outlet) gauge reading.</para>
       /// <para>Subtype points to engine number in machine's list.</para>
       /// </summary>
       I_EngineRadTemp,
       /// <summary>
       /// [Inst: Engine Oil Temperature]
       /// <para>Returns oil temp. gauge reading.</para>
       /// <para>Subtype points to engine number in machine's list.</para>
       /// </summary>
       I_EngineOilTemp,
       /// <summary>
       /// [Inst: Engine Oil Radiator Temperature]
       /// <para>Returns oil temp. (rad. outlet) gauge reading.</para>
       /// <para>Subtype points to engine number in machine's list.</para>
       /// </summary>
       I_EngineOilRadiatorTemp,
       /// <summary>
       /// [Inst: Cylinders Head Temperature]
       /// <para>Returns cyl. head temp. gauge reading.</para>
       /// <para>Generic subtype (-1) shows combined / telepirometro elettrico reading;</para>
       /// <para>Other subtypes point to engine number in machine's list.</para>
       /// </summary>
       I_EngineTemperature,
       /// <summary>
       /// [Inst: Carburettor Temperature]
       /// <para>Returns carb. air temp. gauge reading.</para>
       /// <para>Subtype points to engine number in machine's list.</para>
       /// </summary>
       I_EngineCarbTemp,
       /// <summary>
       /// [Inst: Propellor Pitch]
       /// <para>Returns prop. pitch indicator reading ([0.0, 12.0] for clockwork type).</para>
       /// </summary>
       I_Pitch,
       #endregion
       #region Instrumentation - Machine Spatial
       /// <summary>
       /// [Inst: Velocity]
       /// <para>Returns velocity indicator reading.</para>
       /// </summary>
       I_VelocityIAS,
       /// <summary>
       /// [Inst: Altitude]
       /// <para>Returns altitude indicator reading.</para>
       /// </summary>
       I_Altitude,
       /// <summary>
       /// [Inst: Variometer]
       /// <para>Returns variometer / climb velocity indicator reading.</para>
       /// </summary>
       I_Variometer,
       /// <summary>
       /// [Inst: Slip Indicator]
       /// <para>Returns slip indicator reading.</para>
       /// <para>Generic subtype (-1) shows machine's indicator reading;</para>
       /// <para>Sybtype N shows slip value clamped to [-N, N] range.</para>
       /// </summary>
       I_Slip,
       /// <summary>
       /// [Inst: Magnetic Compass]
       /// <para>Returns magnetic compass parameters.</para>
       /// <para>Generic subtype (-1) shows compass gauge reading, [0.0, 360.0];</para>
       /// <para>Subtype 0 shows azimuth taken off compass card;</para>
       /// <para>Subtype 1 shows card pitch;</para>
       /// <para>Subtype 2 shows card roll.</para>
       /// </summary>
       I_MagneticCompass,
       /// <summary>
       /// [Inst: Repeater Compass]
       /// <para>Returns repeater compass parameters.</para>
       /// <para>Generic subtype (-1) shows reading on the gauge, [0.0, 360.0];</para>
       /// <para>Subtype 0 shows master compass card heading;</para>
       /// <para>Subtype 1 shows master compass card pitch;</para>
       /// <para>Subtype 2 shows master compass card roll.</para>
       /// </summary>
       I_RepeaterCompass,
       /// <summary>
       /// [Inst: Peilzeiger]
       /// <para>Returns course setter preset, [0.0, 360.0].</para>
       /// </summary>
       I_Peilzeiger,
       #endregion
       #region Instrumentation - Machine Systems
       /// <summary>
       /// [Inst: Fuel Reserve]
       /// <para>Returns fuel level indicator reading.</para>
       /// <para>Generic subtype (-1) shows combined reading in all tanks / controlled by selector switch;</para>
       /// <para>Other subtypes point to fuel tank number in machine's list.</para>
       /// </summary>
       I_FuelReserve,
       /// <summary>
       /// [Inst. Liquid Matter Reserve]
       /// <para>Returns liquid level gauge reading.</para>
       /// <para>Subtype 0 shows reading of gauge # 0;</para>
       /// <para>Subtype 1 shows reading of gauge # 1.</para>
       /// </summary>
       I_LiquidReserve,
       /// <summary>
       /// [Inst: Voltamperemeter]
       /// <para>Returns voltamperemeter reading.</para>
       /// </summary>
       I_Voltamperemeter,
       /// <summary>
       /// [Inst: Voltmeter]
       /// <para>Returns voltmeter reading.</para>
       /// </summary>
       I_Voltmeter,
       /// <summary>
       /// [Inst: Amperemeter]
       /// <para>Returns Amperemeter reading.</para>
       /// </summary>
       I_Amperemeter,
       /// <summary>
       /// [Inst: Hydraulic System Pressure]
       /// <para>Returns hydro. press. gauge reading.</para>
       /// </summary>
       I_HydroPressure,
       /// <summary>
       /// [Inst: Hydraulic Emergency Container Pressure]
       /// <para>Returns hydro. emergency discharge container press. gauge reading.</para>
       /// </summary>
       I_HydroEmPressure,
       #endregion
       #region Instrumentation - Gyro Gauges
       /// <summary>
       /// [Inst: Turn Indicator]
       /// <para>Returns turn indicator deflection, [-1.2, 1.2].</para>
       /// </summary>
       I_Turn,
       /// <summary>
       /// [Inst: Artificial Horizon]
       /// <para>Returns artificial horizon parameters.</para>
       /// <para>Subtype 1 shows pitch;</para>
       /// <para>Subtype 2 shows roll.</para>
       /// </summary>
       I_AH,
       /// <summary>
       /// [Inst: DI]
       /// <para>Returns DI reading, [0.0, 360.0].</para>
       /// <para>Generic subtype (-1) shows gauge reading;</para>
       /// <para>Subtype 1 shows DI pinion shift.</para>
       /// </summary>
       I_DirectionIndicator,
       /// <summary>
       /// [Inst: Slaved Compass]
       /// <para>Returns slaved compass (GMK) reading, [0.0, 360.0].</para>
       /// </summary>
       I_SlavedCompass,
       /// <summary>
       /// [Inst: Suction]
       /// <para>Returns gyro suction gauge reading.</para>
       /// </summary>
       I_Suction,
       #endregion

       #region Instrumentation - Radio Equipment
       /// <summary>
       /// [Inst: Lorenz AFN]
       /// <para>Returns Lorenz AFN indicator readings.</para>
       /// <para>Generic subtype (-1) shows indicated deviation, [-1.0, 1.0];</para>
       /// <para>Subtype 1 shows signal gain level, [0.0, 1.0];</para>
       /// <para>Subtype 2 shows detected marker station tone frequency, otherwise 0.0.</para>
       /// </summary>
       I_AFN,
       /// <summary>
       /// [*]
       /// </summary>
       I_ADF,
       /// <summary>
       /// [*]
       /// </summary>
       I_RDF,
       /// <summary>
       /// [*]
       /// </summary>
       I_RMI,
       /// <summary>
       /// [Inst: Fixed Loop Radio Compass]
       /// <para>Returns FLRC indicator reading, [-1.0, 1.0];</para>
       /// </summary>
       I_FLRC,
       /// <summary>
       /// [Inst: Kurssteuerung]
       /// <para>Returns course autopilot parameters.</para>
       /// <para>Generic subtype (-1) shows kurssteuerung mode, {0, 1, 2};</para>
       /// <para>Subtype 1 shows indicated deviation, [-1.0, 1.0];</para>
       /// <para>Subtype 2 shows preset course, [0.0, 360.0].</para>
       /// </summary>
       I_Kurssteuerung,
       #endregion

       #region Instrumentation - Bomb Sight
       /// <summary>
       /// [Inst: Bombsight]
       /// <para>Returns bomb sight parameters.</para>
       /// <para>Subtype 0 shows velocity, m/s;</para>
       /// <para>Subtype 1 shows altitude, m;</para>
       /// <para>Subtype 2 shows side slip, deg;</para>
       /// <para>Subtype 3 shows elevation angle, deg;</para>
       /// <para>Subtype 4 shows distance, m;</para>
       /// <para>Subtype 5 shows gyro readyness, [0.0, 1.0];</para>
       /// <para>Subtype 6 shows 1.0 if automation is on;</para>
       /// <para>Subtype 7 shows 1.0 while dropping bombs;</para>
       /// <para>Subtype 8 shows gyro platform pitch, deg;</para>
       /// <para>Subtype 9 shows gyro platform roll, deg;</para>
       /// </summary>
       I_BombSight,
       #endregion
       #endregion
       #endregion
   }