Ил-2 Штурмовик: Битва за Британию. Скрипты. Список доступных повреждений самолетов — различия между версиями
Материал из АвиаВики
Podvoxx (обсуждение | вклад) (Отмена правки 2344 участника Podvoxx (обсуждение)) |
Podvoxx (обсуждение | вклад) |
||
Строка 1065: | Строка 1065: | ||
#endregion | #endregion | ||
#endregion | #endregion | ||
+ | } | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
[[Категория:Скрипты]] | [[Категория:Скрипты]] |
Версия 19:33, 30 сентября 2011
ParameterTypes { #region Nil /// <summary> /// Nil parameter. Always shows -999.999d. /// </summary> Nil, #endregion
#region Miscellaneous
/// <summary>
/// [Random Value]
/// <para>Generic subtype (-1) indicates a random number in [0.0, 1.0];</para>
/// <para>All other subtypes indicate a random number in [-1.0, 1.0].</para>
/// <para>Also serves as an indicator to an undefined activity.</para>
/// </summary>
M_Random,
/// <summary>
/// [Shake Level]
/// <para>Indicates current machine/camera shake gain.</para>
/// <para>Applies only when Head Shake difficulty option is set to on.</para>
/// </summary>
M_Shake,
/// <summary>
/// [Cabin Damage Flags]
/// <para>Indicates 1.0 when the cabin damage flag with a number of subtype is set, otherwise 0.0.</para>
/// <para>Subtype can only be in range from 0 to 14 as it mirrors to CockpitDamageFlag## of NamedDamageTypes.</para>
/// </summary>
M_CabinDamage,
/// <summary>
/// [Cabin and Camera State]
/// <para>Subtype 31 - Indicates 1.0 when the camera is in aiming sight periscope mode;</para>
/// <para>Subtype 32 - Indicates 1.0 when the view point is raised seat mode.</para>
/// </summary>
M_CabinState,
/// <summary>
/// [Named Damage Flags]
/// <para>Indicates 1.0 when the corresponding damage flag is set, otherwise 0.0.</para>
/// <para>Refer to NamedDamageTypes
for damage flags reference.</para>
/// </summary>
M_NamedDamage,
/// <summary>
/// [Systematic Wear]
/// <para>Indicates corresponding system wear state; [0.0, 1.0]; 1.0 means completely worn and written off system.</para>
/// <para>Subtype 0 shows airframe wear;</para>
/// <para>Subtype 1 shows controls and control lines wear;</para>
/// <para>Subtype 2 shows undercarriage wear;</para>
/// <para>Subtype 3 shows landing flaps wear;</para>
/// <para>Subtype 4 shows pneumatic system wear;</para>
/// <para>Subtype 5 shows hydraulic system wear;</para>
/// <para>Subtype 6 shows electrical system wear;</para>
/// <para>Subtype 7 shows auxilaries;</para>
/// <para>Subtypes 8 to 15 show corresponding engine (#0 - #7) wear level;</para>
/// </summary>
M_SystemWear,
/// <summary>
/// [Health]
/// <para>Indicates appx. health level of the machine; [0.0, 1.0].</para>
/// </summary>
M_Health,
#endregion
#region Controls #region Controls - Machine Generic /// <summary> /// [Steering Control] /// <para>Indicates current steering control (input) of the machine; [-1.0, 1.0].</para> /// </summary> C_Steering, /// <summary> /// [Wheel Brake Control] /// <para>Indicates wheel brakes control; [0.0, 1.0].</para> /// <para>Generic subtype (-1) shows overall brake control input;</para> /// <para>Subtype 0 shows left side brakes;</para> /// <para>Subtype 1 shows right side brakes.</para> /// </summary> C_Brake, /// <summary> /// [Throttle Control] /// <para>Indicates engine throttle control; [0.0, 1.0], on some types [0.0, 1.1].</para> /// <para>Generic subtype (-1) shows control for the current motor selection;</para> /// <para>Other subtypes show control in the corresponding individual motor.</para> /// </summary> C_Throttle, /// <summary> /// [Trigger Control] /// <para>Indicates 1.0 when the corresponding trigger is pressed.</para> /// <para>Trigger # is equal to subtype.</para> /// <para>The trigger # is counted within the machine, not the controlling puppet.</para> /// </summary> C_Trigger, #endregion
#region Controls - Machine Engine(s) /// <summary> /// [Propellor / Pitch Control] /// <para>Indicates engine prop. control; [0.0, 1.0].</para> /// <para>Generic subtype (-1) shows control for the current motor selection;</para> /// <para>Other subtypes show control in the corresponding individual motor.</para> /// </summary> C_Pitch, /// <summary> /// [Mix Control] /// <para>Indicates engine mix control; [0.0, 1.0].</para> /// <para>Generic subtype (-1) shows control for the current motor selection;</para> /// <para>Other subtypes show control in the corresponding individual motor.</para> /// </summary> C_Mix, /// <summary> /// [Water / Air Radiator Control] /// <para>Indicates engine radiator control; [0.0, 1.0].</para> /// <para>For inline engines shows water radiator control;</para> /// <para>for radial engines shows cowl flaps control.</para> /// <para>Generic subtype (-1) shows control for the current motor selection;</para> /// <para>Other subtypes show control in the corresponding individual motor.</para> /// </summary> C_WaterRadiator, /// <summary> /// [Oil Radiator Control] /// <para>Indicates engine oil radiator control; [0.0, 1.0].</para> /// <para>Generic subtype (-1) shows control for the current motor selection;</para> /// <para>Other subtypes show control in the corresponding individual motor.</para> /// </summary> C_OilRadiator, /// <summary> /// [Radiator Automation Control] /// <para>Indicates 1.0 when radiator control is automatic.</para> /// <para>Generic subtype (-1) shows control for the current motor selection;</para> /// <para>Other subtypes show control in the corresponding individual motor.</para> /// </summary> C_RadiatorAutomation, /// <summary> /// [Propellor / Pitch Automation Control] /// <para>Indicates 1.0 when prop. control is automatic.</para> /// <para>Generic subtype (-1) shows control for the current motor selection;</para> /// <para>Other subtypes show control in the corresponding individual motor.</para> /// </summary> C_PitchAutomation, /// <summary> /// [Engine Compressor Control] /// <para>Indicates selected compressor stage.</para> /// <para>Generic subtype (-1) shows control for the current motor selection;</para> /// <para>Other subtypes show control in the corresponding individual motor.</para> /// </summary> C_Compressor, /// <summary> /// [Afterburner / W.E.P. Control] /// <para>Indicates 1.0 when afterburner / W.E.P. is engaged.</para> /// <para>Generic subtype (-1) shows control for the current motor selection;</para> /// <para>Other subtypes show control in the corresponding individual motor.</para> /// </summary> C_Afterburner, /// <summary> /// [Boost Cut-Out Control] /// <para>Indicates 1.0 when engine boost cut-out control is engaged.</para> /// <para>Generic subtype (-1) shows control for the current motor selection;</para> /// <para>Other subtypes show control in the corresponding individual motor.</para> /// </summary> C_BoostEnabler, /// <summary> /// [Slow-Running Cut-Out] /// <para>Indicates 1.0 when engine slow-running cut-out control is engaged.</para> /// <para>Generic subtype (-1) shows control for the current motor selection;</para> /// <para>Other subtypes show control in the corresponding individual motor.</para> /// </summary> C_SlowRunningCutOut, /// <summary> /// [Magnetos Control] /// <para>Indicates magnetos switch(es).</para> /// <para>Generic subtype (-1) shows control for the current motor selection;</para> /// <para>Other subtypes show control in the corresponding individual motor.</para> /// </summary> C_Magneto, /// <summary> /// [Feather Control] /// <para>Indicates propellor feather control.</para> /// <para>Generic subtype (-1) shows control for the current motor selection;</para> /// <para>Other subtypes show control in the corresponding individual motor.</para> /// </summary> C_Feather, /// <summary> /// [Carburetter / Intake Heater Control] /// <para>Indicates engine carb. heater control; [0.0, 1.0].</para> /// <para>Generic subtype (-1) shows control for the current motor selection;</para> /// <para>Other subtypes show control in the corresponding individual motor.</para> /// </summary> C_CarbHeater, #endregion
#region Controls - Machine Systems /// <summary> /// [Hatch / Cabin Door Control] /// <para>Indicates hatch control of the given puppet.</para> /// <para>Subtype equals puppet index.</para> /// </summary> C_HatchDoor, /// <summary> /// [Canopy / Cabin Door Jettison Control] /// <para>Indicates jettison control of the given puppet.</para> /// <para>Subtype equals puppet index.</para> /// </summary> C_HatchJettison, /// <summary> /// [Stopwatch Control] /// <para>Indicates selected stopwatch mode.</para> /// </summary> C_Timer, #endregion
#region Controls - Aircraft Direction /// <summary> /// [Ailerones Control] /// <para>Indicates ailerones contol input; [-1.0, 1.0].</para> /// <para>Positive control is roll right.</para> /// </summary> C_Aileron, /// <summary> /// [Elevator Control] /// <para>Indicates elevator control input; [-1.0, 1.0].</para> /// <para>Positive control is nose up.</para> /// </summary> C_Elevator, /// <summary> /// [Rudder Control] /// <para>Indicates rudder control input; [-1.0, 1.0].</para> /// <para>Positive control is turn right.</para> /// </summary> C_Rudder, /// <summary> /// [Ailerones Trim Control] /// <para>Indicates ailerones trim contol input.</para> /// <para>Positive control is roll right.</para> /// </summary> C_AileronTrim, /// <summary> /// [Elevator Trim Control] /// <para>Indicates elevator trim control input.</para> /// <para>Positive control is nose up.</para> /// </summary> C_ElevatorTrim, /// <summary> /// [Rudder Trim Control] /// <para>Indicates rudder trim control input.</para> /// <para>Positive control is turn right.</para> /// </summary> C_RudderTrim, /// <summary> /// [Tail Wheel Steer Lock Control] /// <para>Indicates 1.0 when tail lock control is engaged.</para> /// </summary> C_TailwheelLock, #endregion
#region Controls - Aircraft Systems /// <summary> /// [Landing Flaps Control] /// <para>Indicates selected landing flaps position index ([0, N]);</para> /// <para>or direction ({0 neutral, 11 in, 12 out}).</para> /// </summary> C_LandingFlap, /// <summary> /// [Leading Edge Slats Control] /// <para>Indicates leading edge slats control; [0.0, 1.0].</para> /// </summary> C_LeadingEdgeSlats, /// <summary> /// [Undercarriage Extension Control] /// <para>Indicates selected undercarriage position index ([0, N]);</para> /// <para>or direction ({0 neutral, 11 in, 12 out}).</para> /// </summary> C_Undercarriage, /// <summary> /// [Undercarriage Emergency System Control] /// <para>Indicates selected undercarriage emergency control position index.</para> /// </summary> C_UndercarriageEmergency, /// <summary> /// [Bomb Bay Doors Control] /// <para>Indicates selected bomb bay doors opening position ([0.0, 1.0]);</para> /// <para>or direction ({0.0 neutral, 0.5 in, 1.0 out}).</para> /// </summary> C_BombBayDoor, /// <summary> /// [Airbrake Control] /// <para>Indicates selected airbrake position index ([0, N]);</para> /// <para>or direction ({0 neutral, 11 in, 12 out}).</para> /// </summary> C_Airbrake, /// <summary> /// [Fuel Tank Switch / Fuel Cock Control] /// <para>Indicates selected fuel cock position index.</para> /// <para>Subtype equals fuel cock index in machine.</para> /// </summary> C_FuelTankSelector, /// <summary> /// [Control for Telepirometro Elettrico / Cylinder Head Temp. Sender Selector] /// <para>Indicates telepirometro elettrico position.</para> /// </summary> C_TelepirometroElettrico, /// <summary> /// [Altimeter Pinion] /// <para>Indicates altimeter pressure setter knob position.</para> /// </summary> C_AltimeterPinion, /// <summary> /// [Anemometro / Speed Dial Rotation Control] /// <para>Indicates velocity indicator shift in degrees.</para> /// </summary> C_AnemometroPinion, /// <summary> /// [Bomb Sight Controls] /// <para>Indicates bomb sight input controls.</para> /// <para>Subtype 0 shows velocity, preset units;</para> /// <para>Subtype 1 shows altitude, preset units;</para> /// <para>Subtype 2 shows slip, preset units;</para> /// <para>Subtype 3 shows distance, preset units;</para> /// <para>Subtype 4 indicates 1.0 when automatic control is engaged.</para> /// </summary> C_BombSight, /// <summary> /// [Aiming Sight / Acemaker Controls] /// <para>Indicates gun sight input controls.</para> /// <para>Subtype 0 shows distance, preset units;</para> /// <para>Subtype 1 shows side / auxilary input, preset units;</para> /// <para>Subtype 2 shows dimmer plate control.</para> /// </summary> C_Sight, /// <summary> /// [Bombenabwurfgerat] /// <para>Indicates bomb distributor controls.</para> /// <para>Subtype 0 shows mode index in modes list;</para> /// <para>Subtype 1 indicates 1.0 when bomb arming is on;</para> /// <para>Subtype 2 shows selected slot (-1.0 points to all slots);</para> /// <para>Subtype 3 shows series length (-1.0 point to max length);</para> /// <para>Subtype 4 shows delay (between bombs in series);</para> /// <para>Subtype 5 indicates 1.0 when in dive short delay mode;</para> /// <para>Subtype 6 shows mode ({0 single, 1 series, 2 salvo}).</para> /// </summary> C_Bombenabwurfgerat, /// <summary> /// [Fuel Contents Indicator Control] /// <para>Indicates selected indicator switch position.</para> /// </summary> C_KraftstoffSelector, /// <summary> /// [Riquid Reserve Indicator 0 Control] /// <para>Indicates selected indicator switch position.</para> /// </summary> C_LiquidGauge0, /// <summary> /// [Riquid Reserve Indicator 1 Control] /// <para>Indicates selected indicator switch position.</para> /// </summary> C_LiquidGauge1, /// <summary> /// [Primary Light Switch] /// <para>Indicates lighting switch position.</para> /// <para>Subtype equals puppet index in machine.</para> /// </summary> C_PriLights, /// <summary> /// [Secondary Light Switch] /// <para>Indicates lighting switch position.</para> /// <para>Subtype equals puppet index in machine.</para> /// </summary> C_SecLights, /// <summary> /// [Gunsight Light Switch] /// <para>Indicates lighting switch position.</para> /// </summary> C_SightLights, /// <summary> /// [Pitot Heater Switch] /// <para>Indicates 1.0 when pitot heater is switched on.</para> /// </summary> C_PitotHeater, /// <summary> /// [Hydraulic Hand Pump Lever] /// <para>Indicates position of emergency hand pump; [0.0, 1.0].</para> /// </summary> C_Handpumpe, /// <summary> /// [Transciever Frequency] /// <para>Indicates selected transciever frequency.</para> /// </summary> C_RadTXRX, /// <summary> /// [Primary Navigation Frequency] /// <para>Indicates selected primary frequency on navigation equipment.</para> /// </summary> C_RadPriNav, /// <summary> /// [Secondary Navigation Frequency] /// <para>Indicates selected secondary frequency on navigation equipment.</para> /// </summary> C_RadSecNav, /// <summary> /// [Kurssteuerung / Course Autopilot Controls] /// <para>Indicates kurssteuerung input.</para> /// <para>Subtype 0 shows mode of operation;</para> /// <para>Subtype 1 shows preset course;</para> /// <para>Subtype 2 indicates 1.0 when temp. disengage switch is on.</para> /// </summary> C_Kurssteuerung, #endregion #endregion
#region Parameters #region Parameters - Machine Animation - Directional /// <summary> /// [Steering Animation] /// <para>Indicates machine steering mechanism position; [-1.0, 1.0].</para> /// </summary> A_Steering, /// <summary> /// [Wheel Brake Animation] /// <para>Indicates wheel brakes position; [0.0, 1.0].</para> /// <para>Generic subtype (-1) shows overall brakes gain;</para> /// <para>Subtype 0 shows left brakes;</para> /// <para>Subtype 1 shows right brakes.</para> /// </summary> A_Brake, /// <summary> /// [Ailerones Animation] /// <para>Indicates ailerones position; [-1.0, 1.0].</para> /// </summary> A_Aileron, /// <summary> /// [Elevator Animation] /// <para>Indicates elevator position; [-1.0, 1.0].</para> /// </summary> A_Elevator, /// <summary> /// [Rudder Animation] /// <para>Indicates rudder position; [-1.0, 1.0].</para> /// </summary> A_Rudder, /// <summary> /// [Ailerones Trim Animation] /// <para>Indicates ailerones trim position / flap deflection.</para> /// </summary> A_AileronTrim, /// <summary> /// [Elevator Trim Animation] /// <para>Indicates elevator trim position / flap deflection.</para> /// </summary> A_ElevatorTrim, /// <summary> /// [Rudder Trim Animation] /// <para>Indicates rudder trim position / flap deflection.</para> /// </summary> A_RudderTrim, #endregion
#region Parameters - Machine Animation - Systematic /// <summary> /// [Undercarriage Extension Animation] /// <para>Indicates undercarriage strut movement extension-wise; [0.0, 1.0].</para> /// <para>Subtype points to the number of strut in machine.</para> /// </summary> A_Undercarriage, /// <summary> /// [Undercarriage Shock Animation] /// <para>Indicates strut shock travel in meters.</para> /// <para>Subtype points to the number of strut in machine.</para> /// </summary> A_UndercarriageShock, /// <summary> /// [Wheel Rotatory Movement Animation] /// <para>Indicates angle of wheel.</para> /// </summary> A_UndercarriageWheel, /// <summary> /// [Canopy / Door Opening Animation] /// <para>Indicates animation phase of canopy or door during opening / closing; [0.0, 1.0].</para> /// <para>Subtype equals to hatch index in machine's list.</para> /// </summary> A_HatchDoor, /// <summary> /// [Bomb Bay Doors Opening Animation] /// <para>Indicates bomb bay(s) doors opening phase; [0.0 1.0].</para> /// </summary> A_BombBayDoor, /// <summary> /// [Wind Generator Impeller Rotatory Animation] /// <para>Indicates wind generator impeller angle in degrees.</para> /// </summary> A_ImpellerAngle, /// <summary> /// [Wind Generator Impeller's Angular Velocity] /// <para>Indicates wind generator angular velocity in degrees / second.</para> /// </summary> A_ImpellerAngularVelocity, /// <summary> /// [Wind Generator Strut Extension Animation] /// <para>Indicates impeller strut extension phase; [0.0, 1.0].</para> /// </summary> A_ImpellerUnfold, /// <summary> /// [Landing Flaps Extension Animation] /// <para>Indicates landing flaps' extension; [0.0 1.0].</para> /// <para>Generic subtype (-1) shows average position of all flaps;</para> /// <para>Subtype 0 shows extension of left flap;</para> /// <para>Subtype 1 shows extension of right flap.</para> /// </summary> A_LandingFlap, /// <summary> /// [Airbrake Extension Animation] /// <para>Indicates airbrake extension; [0.0, 1.0].</para> /// </summary> A_Airbrake, /// <summary> /// [Engine Cowling Flaps Animation] /// <para>Indicates cowling flaps extension; [0.0, 1.0].</para> /// <para>Subtype points to engine number.</para> /// </summary> A_EngineAirRadiator, /// <summary> /// [Engine Water Radiator Flap Animation] /// <para>Indicates water radiator opening; [0.0, 1.0].</para> /// <para>Subtype points to engine number.</para> /// </summary> A_EngineWaterRadiator, /// <summary> /// [Engine Oil Radiator Flap Animation] /// <para>Indicates oil radiator opening; [0.0, 1.0].</para> /// <para>Subtype points to engine number.</para> /// </summary> A_EngineOilRadiator, /// <summary> /// [Leading Edge Slat Extension Animation] /// <para>Indicates leading-edge slats' extension; [0.0, 1.0].</para> /// <para>Generic subtype (-1) shows average position of both slats;</para> /// <para>Subtype 0 shows extension on the left wing;</para> /// <para>Subtype 1 shows extension on the right wing.</para> /// </summary> A_LeadingEdgeSlat, #endregion
#region Parameters - Machine Spatial /// <summary> /// [Misc.: Machine Spatial Coordinates] /// <para>Indicates machine position in world coordinates.</para> /// <para>Subtype 0 shows X-coordinate;</para> /// <para>Subtype 1 shows Y-coordinate;</para> /// <para>Subtype 2 shows Z-coordinate.</para> /// </summary> Z_Coordinates, /// <summary> /// [Misc.: Machine Spatial Orientation] /// <para>Indicates machine orientation, angles are in degrees.</para> /// <para>Subtype 0 shows yaw (0 degrees point E);</para> /// <para>Subtype 1 shows pitch (nose-up is negative);</para> /// <para>Subtype 2 shows roll (right roll is positive).</para> /// </summary> Z_Orientation, /// <summary> /// [Misc.: Machine Overload under Acceleration] /// <para>Indicates overload in m/s/s.</para> /// <para>Generic subtype (-1) shows accelerometer, being 0 under normal conditions;</para> /// <para>Subtype 0 shows acceleraton along machine's X axis;</para> /// <para>Subtype 1 shows acceleraton along machine's Y axis;</para> /// <para>Subtype 2 shows acceleraton along machine's Z axis.</para> /// </summary> Z_Overload, /// <summary> /// [Misc.: Machine Altitude AGL] /// <para>Indicates machine elevation above ground level in meters.</para> /// </summary> Z_AltitudeAGL, /// <summary> /// [Misc.: Machine Altitude MSL] /// <para>Indicates machine elevation above 0.0 Z-plane.</para> /// </summary> Z_AltitudeMSL, /// <summary> /// [Misc.: Machine's Velocity in Air] /// <para>Indicates machine's aerial velocity.</para> /// <para>Generic subtype (-1) shows velocity length;</para> /// <para>Subtype 0 shows aerial flow along machine's X-axis;</para> /// <para>Subtype 1 shows aerial flow along machine's Y-axis;</para> /// <para>Subtype 2 shows aerial flow along machine's Z-axis.</para> /// </summary> Z_VelocityIAS, /// <summary> /// [Misc.: Machine's Velocity in World Coordinates] /// <para>Indicates machine's absolute velocity.</para> /// <para>Generic subtype (-1) shows velocity length;</para> /// <para>Subtype 0 shows machine's speed along world's X-coordinate;</para> /// <para>Subtype 1 shows machine's speed along world's Y-coordinate;</para> /// <para>Subtype 2 shows machine's speed along world's Z-coordinate.</para> /// </summary> Z_VelocityTAS, /// <summary> /// [Misc.: Machine's Mach Factor] /// <para>Indicates machine's aerial velocity devided by sonic speed.</para> /// <para>Generic subtype (-1) shows velocity length;</para> /// <para>Subtype 0 shows aerial flow along machine's X-axis;</para> /// <para>Subtype 1 shows aerial flow along machine's Y-axis;</para> /// <para>Subtype 2 shows aerial flow along machine's Z-axis.</para> /// </summary> Z_VelocityMach, /// <summary> /// [Misc.: Ambient Temperature] /// <para>Indicates air temperature around machine's location, in K.</para> /// </summary> Z_AmbientAirTemperature, #endregion
#region Parameters - Machine Systems /// <summary> /// [Electrical System Point Voltage] /// <para>Indicates current system voltage taken on gen.-battery bridge, in V.</para> /// </summary> S_ElectricVoltage, /// <summary> /// [Electrical System Incandescing Ratio] /// <para>Indicates incandescing bulbs gain factor under current system voltage; [0.0, 1.0].</para> /// <para>Used to vivify lightning SFX.</para> /// </summary> S_ElectricIncandescingRatio, /// <summary> /// [Electical System Amperage] /// <para>Indicates current flow.</para> /// <para>Subtype 0 shows flow in generator loom;</para> /// <para>Subtype 1 shows flow in battery loom;</para> /// <para>Subtype 2 shows flow in consumer loom.</para> /// </summary> S_ElectricAmperage, /// <summary> /// [Primary Pit Lightning] /// <para>Indicates primary pit lights gain factor for given puppet.</para> /// </summary> S_ElectricPrimaryPitLight, /// <summary> /// [Secondary Pit Lightning] /// <para>Indicates secondary pit lights gain factor for given puppet.</para> /// </summary> S_ElectricSecondaryPitLight, /// <summary> /// [Gunsight Lightning] /// <para>Indicates gunsight / reticle lightning gain factor.</para> /// </summary> S_ElectricSightLight, /// <summary> /// [Fuel Reserve] /// <para>Indicates machine's fuel reserve, kgs.</para> /// <para>Generic subtype (-1) shows total reserve;</para> /// <para>Subtype N shows reserve in the given fuel tank.</para> /// </summary> S_FuelReserve, /// <summary> /// [Hatch Position] /// <para>Indicates given hatch opening phase, [0.0, 1.0].</para> /// <para>Subtype points to hatch number in machine's list.</para> /// </summary> S_HatchDoor, #endregion
#region Parameters - Aircraft Systems /// <summary> /// [Undercarriage Master Valve] /// <para>Indicates position of undercarriage hydraulic valve ({0 up, 1 down, 2 neutral, 3 neutral}).</para> /// </summary> S_UndercarriageValve, /// <summary> /// [Pneumatic Container Pressure] /// <para>Indicates current container pressure in machine's set units of measure.</para> /// <para>Subtype 0 shows pressure in primary container;</para> /// <para>Subtype 1 shows pressure in secondary container.</para> /// </summary> S_PneumoContainerPressure, /// <summary> /// [Pneumatic Line Pressure(s)] /// <para>Indicates pressure in given pneumatic line.</para> /// <para>Generic subtype (-1) shows nominal system pressure;</para> /// <para>Subtype 0 shows compressor line pressure;</para> /// <para>Subtype 1 shows secondary pressure;</para> /// <para>Subtype 2 shows flaps line pressure;</para> /// <para>Subtype 3 shows undercarriage line pressure;</para> /// <para>Subtype 4 shows wheel brakes line pressure.</para> /// </summary> S_PneumoLinePressure, /// <summary> /// [Hydro System Pressure(s)] /// <para>Indicates pressure in given hydro line.</para> /// <para>Generic subtype (-1) shows compressor line pressure;</para> /// <para>Subtype 0 shows nominal system pressure;</para> /// <para>Subtype 1 shows pressure in emergency discharge container.</para> /// </summary> S_HydroPressure, /// <summary> /// [Hydro System Reservoir] /// <para>Indicates reservoir contents, kgs.</para> /// </summary> S_HydroReserve, /// <summary> /// [Sturzanlage Mode of Operation] /// <para>Indicates mode ({0 cruise, 1 dive, 2 bomb drop, 3 recovery, 4 automation reset, 5 automation switch to cruise}).</para> /// </summary> S_Sturzanlage, /// <summary> /// [Gun Mode of Operation] /// <para>Indicates mode of given gun ({0 dismantled, 1 ready, 2 firing, 3 reloading, 4 jammed}).</para> /// <para>Subtype points to gun attachment hook (looking up gun on hook named [_Gun+subtype]).</para> /// </summary> S_GunOperation, /// <summary> /// [Gun Ammo Reserve] /// <para>Indicates current number of bullets in gun storage.</para> /// <para>Subtype points to gun attachment hook (looking up gun on hook named [_Gun+subtype]).</para> /// </summary> S_GunReserve, /// <summary> /// [Gun Clip Reserve] /// <para>Indicates number of bullets in current gun loaded clip / ammo box.</para> /// <para>Subtype points to gun attachment hook (looking up gun on hook named [_Gun+subtype]).</para> /// </summary> S_GunClipReserve, /// <summary> /// [Bomb Spawn Ammo Reserve] /// <para>Indicates number of bombs in bombgun storage.</para> /// <para>Subtype points to attachment hook (looking up gun on hook named [_Bomb+subtype]).</para> /// </summary> S_BombReserve, /// <summary> /// [Fenster Opening] /// <para>Indicates fenster opening, [0.0, 1.0].</para> /// </summary> S_Fenster, /// <summary> /// [Pitot Heater] /// <para>Indicates pitot heater gain ratio.</para> /// </summary> S_PitotHeater, /// <summary> /// [Bombenabwurfgerat] /// <para>Indicates machine bomb distributor parameters.</para> /// <para>Generic subtype (-1) shows mode ({0 single, 1 series, 2 salvo});</para> /// <para>Subtype 0 shows mode ({0 single, 1 series, 2 salvo});</para> /// <para>Subtype 1 shows 1.0 if arming is on;</para> /// <para>Subtype 2 shows selected slot (-1 if all slots selected);</para> /// <para>Subtype 3 shows series length (-1 if all bombs selected);</para> /// <para>Subtype 4 shows 1.0 if short / dive delay is on;</para> /// <para>Subtype 9 shows 1.0 while abwurfgerat is in bomb drop operation.</para> /// </summary> S_Bombenabwurfgerat, /// <summary> /// [Turret] /// <para>Indicates machine turret parameters.</para> /// <para>Subtype digit 1 stands for puppet #; Subtype digit 2 stands turret index in given puppet;</para> /// <para>Subtype digit 3: 0 - Unfold, 1 - Lower Lock, 2 - Mount Yaw, 3 - Upper Lock,</para> /// <para> 4 - Mount Pitch, 5 - Swivel Yaw, 6 - Swivel Pitch.</para> /// <para>Ex.: 105 - Swivel yaw on main turret of puppet #1.</para> /// </summary> S_Turret, #endregion
#region RESERVED PLACEHOLDERS M_Reserved000, M_Reserved001, M_Reserved002, M_Reserved003, M_Reserved004, M_Reserved005, M_Reserved006, M_Reserved007, M_Reserved008, M_Reserved009, M_Reserved00A, M_Reserved00B, M_Reserved00C, M_Reserved00D, M_Reserved00E, M_Reserved00F, M_Reserved010, M_Reserved011, M_Reserved012, M_Reserved013, M_Reserved014, M_Reserved015, M_Reserved016, M_Reserved017, M_Reserved018, M_Reserved019, M_Reserved01A, M_Reserved01B, M_Reserved01C, M_Reserved01D, M_Reserved01E, M_Reserved01F, #endregion
#region Parameters - Instrumentation #region Instrumentation - Assorted /// <summary> /// [Inst: Timer] /// <para>Returns timer reading.</para> /// <para>Generic subtype (-1) shows clock / time of day, hours, [0.0, 24.0);</para> /// <para>Subtype 0 shows stopwatch reading, seconds.</para> /// </summary> I_Timer, // NB: I_Timer works as a separator for all I_* types, must be on top of instrumentation section /// <summary> /// [Inst: Ambient Temperature] /// <para>Returns ambient temperature gauge reading.</para> /// </summary> I_AmbientTemp, #endregion
#region Instrumentation - Engine /// <summary> /// [Inst: Engine RPM] /// <para>Returns engine RPM gauge reading.</para> /// <para>Subtype points to engine number in machine's list.</para> /// </summary> I_EngineRPM, /// <summary> /// [Inst: Engine Manifold Pressure] /// <para>Returns engine manifold press. gauge reading.</para> /// <para>Subtype points to engine number in machine's list.</para> /// </summary> I_EngineManPress, /// <summary> /// [Inst: Engine Boost Pressure] /// <para>Returns boost gauge reading.</para> /// <para>Subtype points to engine number in machine's list.</para> /// </summary> I_EngineBoostPress, /// <summary> /// [Inst: Engine Water Pressure] /// <para>Returns water press. gauge reading.</para> /// <para>Subtype points to engine number in machine's list.</para> /// </summary> I_EngineWatPress, /// <summary> /// [Inst: Engine Oil Pressure] /// <para>Returns oil pressure gauge reading.</para> /// <para>Subtype points to engine number in machine's list.</para> /// </summary> I_EngineOilPress, /// <summary> /// [Inst: Engine Fuel Pressure] /// <para>Returns fuel pressure gauge reading.</para> /// <para>Subtype points to engine number in machine's list.</para> /// </summary> I_EngineFuelPress, /// <summary> /// [Inst: Engine Water Temperature] /// <para>Returns water temp. gauge reading.</para> /// <para>Subtype points to engine number in machine's list.</para> /// </summary> I_EngineWatTemp, /// <summary> /// [Inst: Engine Water Radiator Temperature] /// <para>Returns water temp. (rad. outlet) gauge reading.</para> /// <para>Subtype points to engine number in machine's list.</para> /// </summary> I_EngineRadTemp, /// <summary> /// [Inst: Engine Oil Temperature] /// <para>Returns oil temp. gauge reading.</para> /// <para>Subtype points to engine number in machine's list.</para> /// </summary> I_EngineOilTemp, /// <summary> /// [Inst: Engine Oil Radiator Temperature] /// <para>Returns oil temp. (rad. outlet) gauge reading.</para> /// <para>Subtype points to engine number in machine's list.</para> /// </summary> I_EngineOilRadiatorTemp, /// <summary> /// [Inst: Cylinders Head Temperature] /// <para>Returns cyl. head temp. gauge reading.</para> /// <para>Generic subtype (-1) shows combined / telepirometro elettrico reading;</para> /// <para>Other subtypes point to engine number in machine's list.</para> /// </summary> I_EngineTemperature, /// <summary> /// [Inst: Carburettor Temperature] /// <para>Returns carb. air temp. gauge reading.</para> /// <para>Subtype points to engine number in machine's list.</para> /// </summary> I_EngineCarbTemp, /// <summary> /// [Inst: Propellor Pitch] /// <para>Returns prop. pitch indicator reading ([0.0, 12.0] for clockwork type).</para> /// </summary> I_Pitch, #endregion
#region Instrumentation - Machine Spatial /// <summary> /// [Inst: Velocity] /// <para>Returns velocity indicator reading.</para> /// </summary> I_VelocityIAS, /// <summary> /// [Inst: Altitude] /// <para>Returns altitude indicator reading.</para> /// </summary> I_Altitude, /// <summary> /// [Inst: Variometer] /// <para>Returns variometer / climb velocity indicator reading.</para> /// </summary> I_Variometer, /// <summary> /// [Inst: Slip Indicator] /// <para>Returns slip indicator reading.</para> /// <para>Generic subtype (-1) shows machine's indicator reading;</para> /// <para>Sybtype N shows slip value clamped to [-N, N] range.</para> /// </summary> I_Slip, /// <summary> /// [Inst: Magnetic Compass] /// <para>Returns magnetic compass parameters.</para> /// <para>Generic subtype (-1) shows compass gauge reading, [0.0, 360.0];</para> /// <para>Subtype 0 shows azimuth taken off compass card;</para> /// <para>Subtype 1 shows card pitch;</para> /// <para>Subtype 2 shows card roll.</para> /// </summary> I_MagneticCompass, /// <summary> /// [Inst: Repeater Compass] /// <para>Returns repeater compass parameters.</para> /// <para>Generic subtype (-1) shows reading on the gauge, [0.0, 360.0];</para> /// <para>Subtype 0 shows master compass card heading;</para> /// <para>Subtype 1 shows master compass card pitch;</para> /// <para>Subtype 2 shows master compass card roll.</para> /// </summary> I_RepeaterCompass, /// <summary> /// [Inst: Peilzeiger] /// <para>Returns course setter preset, [0.0, 360.0].</para> /// </summary> I_Peilzeiger, #endregion
#region Instrumentation - Machine Systems /// <summary> /// [Inst: Fuel Reserve] /// <para>Returns fuel level indicator reading.</para> /// <para>Generic subtype (-1) shows combined reading in all tanks / controlled by selector switch;</para> /// <para>Other subtypes point to fuel tank number in machine's list.</para> /// </summary> I_FuelReserve, /// <summary> /// [Inst. Liquid Matter Reserve] /// <para>Returns liquid level gauge reading.</para> /// <para>Subtype 0 shows reading of gauge # 0;</para> /// <para>Subtype 1 shows reading of gauge # 1.</para> /// </summary> I_LiquidReserve, /// <summary> /// [Inst: Voltamperemeter] /// <para>Returns voltamperemeter reading.</para> /// </summary> I_Voltamperemeter, /// <summary> /// [Inst: Voltmeter] /// <para>Returns voltmeter reading.</para> /// </summary> I_Voltmeter, /// <summary> /// [Inst: Amperemeter] /// <para>Returns Amperemeter reading.</para> /// </summary> I_Amperemeter, /// <summary> /// [Inst: Hydraulic System Pressure] /// <para>Returns hydro. press. gauge reading.</para> /// </summary> I_HydroPressure, /// <summary> /// [Inst: Hydraulic Emergency Container Pressure] /// <para>Returns hydro. emergency discharge container press. gauge reading.</para> /// </summary> I_HydroEmPressure, #endregion
#region Instrumentation - Gyro Gauges /// <summary> /// [Inst: Turn Indicator] /// <para>Returns turn indicator deflection, [-1.2, 1.2].</para> /// </summary> I_Turn, /// <summary> /// [Inst: Artificial Horizon] /// <para>Returns artificial horizon parameters.</para> /// <para>Subtype 1 shows pitch;</para> /// <para>Subtype 2 shows roll.</para> /// </summary> I_AH, /// <summary> /// [Inst: DI] /// <para>Returns DI reading, [0.0, 360.0].</para> /// <para>Generic subtype (-1) shows gauge reading;</para> /// <para>Subtype 1 shows DI pinion shift.</para> /// </summary> I_DirectionIndicator, /// <summary> /// [Inst: Slaved Compass] /// <para>Returns slaved compass (GMK) reading, [0.0, 360.0].</para> /// </summary> I_SlavedCompass, /// <summary> /// [Inst: Suction] /// <para>Returns gyro suction gauge reading.</para> /// </summary> I_Suction, #endregion
#region Instrumentation - Radio Equipment /// <summary> /// [Inst: Lorenz AFN] /// <para>Returns Lorenz AFN indicator readings.</para> /// <para>Generic subtype (-1) shows indicated deviation, [-1.0, 1.0];</para> /// <para>Subtype 1 shows signal gain level, [0.0, 1.0];</para> /// <para>Subtype 2 shows detected marker station tone frequency, otherwise 0.0.</para> /// </summary> I_AFN, /// <summary> /// [*] /// </summary> I_ADF, /// <summary> /// [*] /// </summary> I_RDF, /// <summary> /// [*] /// </summary> I_RMI, /// <summary> /// [Inst: Fixed Loop Radio Compass] /// <para>Returns FLRC indicator reading, [-1.0, 1.0];</para> /// </summary> I_FLRC, /// <summary> /// [Inst: Kurssteuerung] /// <para>Returns course autopilot parameters.</para> /// <para>Generic subtype (-1) shows kurssteuerung mode, {0, 1, 2};</para> /// <para>Subtype 1 shows indicated deviation, [-1.0, 1.0];</para> /// <para>Subtype 2 shows preset course, [0.0, 360.0].</para> /// </summary> I_Kurssteuerung, #endregion
#region Instrumentation - Bomb Sight /// <summary> /// [Inst: Bombsight] /// <para>Returns bomb sight parameters.</para> /// <para>Subtype 0 shows velocity, m/s;</para> /// <para>Subtype 1 shows altitude, m;</para> /// <para>Subtype 2 shows side slip, deg;</para> /// <para>Subtype 3 shows elevation angle, deg;</para> /// <para>Subtype 4 shows distance, m;</para> /// <para>Subtype 5 shows gyro readyness, [0.0, 1.0];</para> /// <para>Subtype 6 shows 1.0 if automation is on;</para> /// <para>Subtype 7 shows 1.0 while dropping bombs;</para> /// <para>Subtype 8 shows gyro platform pitch, deg;</para> /// <para>Subtype 9 shows gyro platform roll, deg;</para> /// </summary> I_BombSight, #endregion #endregion #endregion }